ZettaOne supports advanced analysis with extensive experience on highspeed interfaces. As clock speeds and data rates are increasing and industry need high-speed interfaces with multi-GHz frequencies, Signal integrity (SI) and power integrity (PI) analysis are key factor achieving a PCB or system level performances. Simulations are performed with leading-edge SI software to ensure the board performance meets as expected. Multiple tools are used to perform a wide range of analysis tasks including 3D EM full-wave extraction, network analysis, channel analysis, AC power analysis and DC power analysis.
• Feasibility Study
• Stack up design
• Conn/Cable selection
• Root cause analysis on existing design
• Pre/Post Layout Simulations
• Topology exploration for parallel interfaces
• Frequency and Time domain analysis
• TDR analysis and IBIS/AMI simulation
• Model extraction, S-parameter & RLC parasitic extraction
• BER, ISI, Jitter, Loss(IL,RL) analysis, bath-tub plots, etc
• High speed serial/parallel interface analysis
• Trace, via, connector, end-to-end channel modeling using EM solver
• Crosstalk & s-parameter modeling of traces & interconnects
~ Ethernet over backplane: IEEE P802.3ap 10 Gb/s, IEEE
~ P802.3ba 40 Gb/s and100 Gb/s
~ Ethernet over backplane (10GBASE-KR), Gearbox
~ Ethernet over backplane: IEEE P802.3bj 25gbps/lane (100GBASE-KP4 PAM4 & KR4-NRZ-PAM2)
~ Chip to Module SFI: SFP ( INF-8074i), SFP+ (SFF-8431)
~ QSFP+ (SFF-8679), CFP/CFP2, XAUI/RXAUI/QSGMII
~ SFF-8087/88 (MiniSAS int./ext.), SFF-8643/44 miniSAS
~ HD internal/external
~ SFF-8639/8680 (NVMe/SAS drives)
~ USB, SATA, SAS3, NVMe, HDD/SSD, SAS expanders
~ PCIe switches / controllers, PCIe add-on cards
~ QPI/UPI, PCIE, DMI, QSGMII, SGMII
~ DDR4/3/2, RLDRAM, QDR , LPDDR
~ PCI Express, PCI Express 2.0, PCI Express 3.0
~ USB 2.0, USB 3.0
~ Simbeor - Electromagnetic Signal Integrity Software
~ Mentor Graphics HyperLynx SI GHz
~ Allegro PCB SI tool
~ Ansys HFSS
~ Cadence Sigrity
~ ADS
~ Si-Soft
